Power Supplies and Chargers

Custom Power Supplies

eta­tron­ix devel­ops and man­u­fac­tures pow­er sup­plies for demand­ing appli­ca­tions: AC/DC pow­er sup­plies, DC/DC and DC/AC con­vert­ers, charg­ers, bat­tery sys­tems with bat­tery man­age­ment sys­tem (BMS) and USB‑C Power Delivery, wired or wireless.

Power, volt­age, form fac­tor, envi­ron­ment and stan­dards are defined by your appli­ca­tion, not by a cat­a­log. We describe our approach from spec­i­fi­ca­tion to series pro­duc­tion under Development and Manufacturing.

Power Supplies and Converters

Digitally controlled 600 W DC/DC converter by etatronix

From plug-in and built-in pow­er sup­plies to sealed units for out­door use: we devel­op AC/DC pow­er sup­plies, DC/DC con­vert­ers and invert­ers in any pow­er class, with the topol­o­gy and tech­nol­o­gy that fit the task.

  • Topologies such as PFC, LLC, phase-shift and fly­back, with SiC and GaN semi­con­duc­tors on request
  • Digitally con­trolled: out­put val­ues, pro­tec­tion func­tions and char­ac­ter­is­tics adjustable via firmware
  • Designed to IEC 62368–1, IEC 60601–1, MIL-STD-461 and MIL-STD-810
  • Supplied as open-frame board, encap­su­lat­ed mod­ule or com­plete unit

Examples: 600 W DC/DC con­vert­er with up to 98% effi­cien­cy, 300 W true sine wave invert­er, 1.5 kW RPS1500 pow­er supply.

Chargers and Battery Systems

We devel­op charg­ers, bat­ter­ies and bat­tery man­age­ment sys­tems (BMS) indi­vid­u­al­ly or as a com­plete sys­tem, for any cell chem­istry and any form fac­tor, from single-bay charg­ers to charg­ing stations.

  • Li-ion, LiFePO4, NiMH or lead-acid, charg­ing algo­rithms adjustable in software
  • Battery man­age­ment with state of charge (SoC), state of health (SoH) and pro­tec­tion func­tions, com­mu­ni­ca­tion via SMBus, I²C or CAN
  • UN 38.3 and IEC 62133–2, ATEX and IECEx for haz­ardous areas
  • Wireless charg­ing on request, with no exposed con­tacts to wear out
Custom battery pack with battery management system (BMS) by etatronix

USB‑C Power Delivery

USB power supply with USB-A and USB Power Delivery (60 W) by etatronix

We devel­op USB‑C solu­tions based on USB Power Delivery 3.1 up to 240 W, includ­ing Programmable Power Supply (PPS): as a pow­er sup­ply, as a charg­ing inter­face or as an inter­nal sup­ply, also with a bat­tery or wire­less pow­er transfer.

From December 14, 2028, exter­nal pow­er sup­plies in the EU require a USB‑C port (Regulation (EU) 2025/2052). We sup­port you with design and approval.

Interfaces and Firmware

Our pow­er sup­plies com­mu­ni­cate with your device and your con­trol sys­tem via CAN, SMBus, PMBus, I²C, UART, RS-485, USB, Ethernet or wire­less (Bluetooth LE, Wi-Fi).

Our own proven firmware build­ing blocks for pow­er con­ver­sion, charge con­trol and auto­mat­ic source selec­tion short­en development.

Rugged Power Supplies for Defense

Fanless, water­proof, designed to MIL-STD-810 and MIL-STD-461: the RPS series, devel­oped and man­u­fac­tured in Germany.

RPS1500: fanless 1,500 W AC/DC power supply in an olive green IP67 enclosure

Get to know us

Talk to us about your power supply and wireless power transfer requirements